XDe-
Airing Pug Mill :
The Machine is widely used for shaping and extruding
of Ceramic Clay by Plastic process where De-airing is
necessary.It consists of three chambers in one line:-
1.feeding & Mixing Chamber.
2.vacuum Chamber.
3.Auger Chamber.
The Machine is driven by a Motor through Worm
Reduction Gear Box placed behind the
feeding Chamber. Therefore, the Total Units are placed
on a common Base Frame for accurate
Installation.Design-IN-LINE.
Capacity available : 2-3 ton, 1-2 ton, 1/2-1 ton
per hour. |
